Secret android codes.

These are the secret android codes which you may copy and paste to your dialer and see the result immediately. You don’t need to press call button or any other. And, some codes may not work in your device. These codes are really fantastic. Lets get started.

1)*#*#4636#*#*
This shows the following information about your phone and battery:
Phone information
Battery information
Battery history
Usage statistics

2)*#*#7780#*#*
This performs a factory data reset, and will remove the following:
-Google account settings stored in your phone
-System and application data and settings
-Downloaded applications
It will NOT remove:
-Current system software and bundled
applications
-SD card files e.g. photos, music files, etc.
PS: This one asks for a confirmation, so if you
do get a chance to change your mind.

3)*2767*3855#
Don’t try this one unless you’re sure. This code is used for factory format, and will remove all
files and settings including the internal memory storage. It will also reinstall the firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the battery from the phone, and even then, you run the risk of bricking your phone.

4)*#*#34971539#*#*
This code is used to get information about the
camera. It shows following 4 menus:
-Update camera firmware in image (Don’t try this option)
-Update camera firmware in SD card
-Get camera firmware version
-Get firmware update count
WARNING: Never use the first option otherwise
your phone camera may stop working, and
there is really no reason to update the camera
firmware anyway.

5)*#*#7594#*#*
This code will change the “End Call / Power” button action on your phone. By default, if
you long press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so
you don’t need to waste your time in selecting the option.

6)*#*#273283*255*663282*#*#*
This code opens a File copy screen where you
can backup your media files e.g. Images,
Sound, Video and Voice memo.

7)*#*#197328640#*#*
This code can be used to enter into Service
mode. You can run various tests and change
settings in the service mode.

8)WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR
*#*#528#*#* – WLAN test (Use “Menu” button to start various tests)
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address

9)*#*#8255#*#*
This code can be used to launch GTalk Service Monitor.

10)Codes to get Firmware version information:
*#*#4986*2650468#*#* – PDA, Phone, H/
W, RFCallDate
*#*#1234#*#* – PDA and Phone
*#*#1111#*#* – FTA SW Version
*#*#2222#*#* – FTA HW Version
*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number

11)Codes to launch various Factory Tests:
*#*#0283#*#* – Packet Loopback
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* –

12)Melody test
*#*#0842#*#* – Device test

13)Vibration test and BackLight test
*#*#2663#*#* – Touch screen version
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version